Control of unmanned systems over IP networks

Command Beyond Range

GridX connects a pilot to a remote ground station over the internet or a private network. Video, telemetry and control in real time, from a familiar Autel or DJI smart controller. The station is just an app on a stock controller — no rework, no boards, no wiring.

3
apps: station, client and a desktop helper
2
controller makers: Autel and DJI
up to 32
control channels — as many as you need, with a flexible map

Ecosystem

Three apps, one system

The station stays next to the aircraft, the pilot works from anywhere, and the desktop app gets controllers ready in minutes.

  • Ground station

    GridX GS

    An Autel or DJI controller next to the aircraft. It talks to the aircraft, sends video to the pilot and carries out the pilot's commands.

    • Aircraft cameras and the station screen
    • Hover and return to home when the link is lost
    • The operator on site can take control back
  • Pilot app

    GridX

    Runs on a controller, tablet or phone. It finds stations, shows their video and sends control.

    • Stations on the local network and over Netbird
    • The smart controller's own sticks and buttons
    • Control maps for any station
  • Desktop app

    GridX Netbird & Devices

    A wizard that installs GridX on a controller over USB, grants permissions and connects it to the Netbird network.

    • Windows, macOS and Linux
    • Every step is listed before it runs
    • Units, devices and access keys

How it works

From power-on to flight

No extra hardware: just controllers and a network between them.

  1. 1

    Prepare the controllers

    Connect a controller to a computer with a USB cable — the wizard installs the app and sets everything up.

  2. 2

    Station next to the aircraft

    GridX GS starts with the controller, connects to the aircraft and waits for a pilot.

  3. 3

    The pilot picks a station

    GridX finds stations on the local network by itself, and over Netbird on the internet too.

  4. 4

    Flight

    The pilot sees video and telemetry and flies the aircraft from their own controller in real time.

Range is set by the network, not by the controller's radio link.

Benefits

Benefits over the classic setup

The usual setup is a laptop with a separate FPV radio for the pilot, and a reworked controller with extra boards and wiring as the ground station. GridX does the same job with stock smart controllers — software only.

  • Classic setup

    • A reworked controller: DAC boards, a compute module, wiring
    • Laptop + FPV radio + cables and adapters
    • Expensive and bulky workstation
    • Pilots must be retrained on FPV controls
    • Slow deployment, more points of failure
  • GridX

    • 100% software — on a stock controller, no rework
    • One smart controller — everything in a single device
    • Lower kit and maintenance cost
    • Native Autel/DJI sticks and buttons — no retraining
    • Power on and be online in a minute
  • No controller rework

    The ground station is an app on a stock smart controller. No DAC boards, compute modules or wiring inside: install it and it works.

  • Lower cost

    One compact controller instead of a laptop, an FPV radio and peripherals. Less hardware — less cost, weight and logistics.

  • No retraining

    Familiar smart-controller ergonomics: sticks, buttons and touchscreen, just like native control.

  • Fast deployment

    No cables on site: power the controller on, pick a ground station from the list — and operate.

  • Beyond line of sight

    Control over the internet or a private network: range is set by the network, not by a radio link.

  • Secure connection

    A private network and encrypted transport. Units cannot see each other's devices.

Ground station

GridX GS

The controller next to the aircraft becomes a ground station

GridX GS runs on an Autel or DJI smart controller. It talks to the aircraft, sends video to the pilot and carries out the pilot's commands, while the operator beside it always sees who is flying.

The station screen

The aircraft camera full screen, telemetry at the top and a line that shows who is flying right now.

  • Battery, satellites, altitude, speed, distance to home, link quality
  • Photo, recording, gimbal centring and camera switching
  • Take-off, landing and return to home with one button
The station screen while a remote pilot is flying

Readiness before the flight

The station panel lists everything the station needs, line by line. Green means ready, amber tells you what to do.

  • Vendor SDK, aircraft, screen streaming, remote touch, autostart
  • The station name and its addresses on the local network and in Netbird
  • Pairing with another aircraft right from the station
The readiness card on the station panel

Safety and settings

The station operator is in charge: they decide whether control may be taken over, and can take it back at any moment.

  • Pilot link lost: the aircraft hovers, then returns to home
  • The operator sets the delay before the return
  • One switch forbids taking control over
Station settings: name, safety, takeover
  • Several cameras

    The pilot sees the station screen and the aircraft cameras: main, night and thermal, where the aircraft has them.

  • Remote touch

    The pilot's taps on the station screen video land on the station itself.

  • Return to home

    If the pilot link drops, the aircraft hovers and, after a delay, flies back to the take-off point by itself.

  • Autostart

    The station opens by itself when the controller is switched on — on site you only power it up.

Pilot app

GridX

The pilot's controller — anywhere

GridX shows the station's video and sends control to the aircraft from a controller, tablet or phone — on the local network or over the internet.

Station list

Stations on the local network appear by themselves. Stations on the internet are reached through the Netbird network.

  • Name, type, address and version of every station
  • A badge shows how the station was found: LAN or Netbird
  • You can see whether a station is free and who is flying it
The ground station list

Video from the station

The pilot sees what the station operator sees: aircraft video, telemetry and buttons. Taps on the screen are passed to the station.

  • The station screen and separate aircraft cameras
  • Camera choice right in the video window
  • A crosshair in the centre of the frame
Video player: the ground station screen

Control maps

A map says which control goes to which channel. For GridX stations it is built in; for the rest you set it up once.

  • Up to 32 channels — as many as you need: an axis, a button or a switch
  • Assign by movement: move a stick or press a button
  • Templates and sharing maps between controllers
The control map editor

Controls test

Before a flight, check that the controller works as it should: sticks, wheels and buttons are shown live.

  • Position of both sticks and wheels
  • The last button pressed and the flight mode
  • Shows whether the control stream reaches the station
The controls test screen
  • Who is flying

    One pilot controls a station at a time. You see who it is, and control can be taken over only if the operator allows it.

  • RC transmitter over USB

    Plug a transmitter in joystick mode — GridX reads its sticks and switches.

  • Tablet or phone

    Works without a smart controller too: control from a gamepad or a keyboard.

  • Built-in help

    The same guide as on this site opens right on the controller.

Desktop app

GridX Netbird & Devices

A controller ready in minutes

GridX Netbird & Devices is an app for Windows, macOS and Linux. Over a USB cable it installs GridX, grants permissions and connects the controller to the Netbird network. Doing the same by hand takes longer.

What the wizard does

  1. Finds the controller connected over USB
  2. Installs GridX GS or the GridX pilot app
  3. Enables screen streaming without a permission prompt
  4. Enables remote touch
  5. Sets up autostart when the controller is switched on
  6. Turns off the vendor app that gets in the station's way
  7. Installs Netbird and connects the controller with an access key
  8. Starts the app and checks the result

Controller setup wizard

Three steps: pick the controller, the app and where to install from. The wizard then shows the whole plan and runs it by itself.

  • A station for Autel or DJI, or the pilot app
  • An update keeps the controller's settings
  • Connecting to Netbird is optional
Setup wizard: choosing the app

Controllers over USB

All connected controllers in one list: the model, what is installed and whether the controller is ready.

  • GridX, GridX GS and Netbird versions on each controller
  • A “ready” badge when everything is set up
  • Works without signing in to the network — a cable is enough
Controllers connected over USB

The Netbird network under control

For the network administrator: devices, units and access keys — without handling groups and policies by hand.

  • Pilots see only their own unit's stations
  • The state of every device: online or not
  • An access key puts the device straight into the right group
Devices of the Netbird network
  • Units

    Each unit has its own pilots and stations. Units cannot see each other's devices.

  • Access keys

    One-off keys with an expiry date for new pilot controllers and stations.

  • Network check

    Finds mistakes in the network setup and fixes them with one click.

  • Diagnostics

    The state of ADB, the Netbird server and every controller — and what exactly was checked.

The screenshots show demo data; the apps' interface is in Ukrainian.

Compatibility

Controllers and ground stations

GridX works with GridX stations and with BlastPilot stations.

  • Smart controllers

    • Autel Smart Controller V3Supported
    • DJI RC Plus/ProSupported
  • Ground stations

    • GridXSupported
    • BlastPilotSupported

Contacts

Contact us

Write to us to get the app, ask a question or share feedback.

  • We send the apps and help with the first run
  • We issue keys for the GridX Netbird network
  • Feedback, ideas and bug reports are welcome

Or write to us directly:info@gridx.com.ua

Images, PDF, documents, spreadsheets. Up to 10 files, 15 MB total.

    What to include in your message

    The more you tell us about yourself, the faster we can verify you and reply.

    If the information is incomplete or part of it is withheld, we may not reply.